Automatic Window Malfunction and Remedy in Ford Models

 

                           Ford Malfunctions Today, I will talk about "Automatic Glass", which is of great importance for the vehicle. While automatic glass is very important for the vehicle, it is associated with frequent malfunctions in some Ford series. While Automatic Window Failure is caused by various reasons, the problem can be solved by trying some small ways.

                                  Causes of Automatic Glass Failure

         Ford users who encounter problems such as Automatic Window Not Opening become anxious. If the automatic window does not open or closes late when opened, they can get to the source of the problem safely by performing the checks I will give below.

                 Window Sensor Must Be Cleaned: The sensors become large when opening the automatic window. When automatic opening is pressed, the windows lower and raise with the help of the sensor. If the sensors are clogged and no longer functional, it is time to replace them and maintain them.

                  Way to Reset the Windows: Resetting the glass can provide a solution in case of automatic glass failure. Be careful during the reset process. You must remove the "Negative" cable on the battery. Before the procedure, close all windows and turn off any other electrical currents of the vehicle. You should unplug the cable and wait for a maximum of 15-20 minutes. Afterwards, when you plug in the cable and start the vehicle, the windows will automatically reset.

             Checking with a Diagnostic Device: The electrical parts of the vehicle may be faulty or completely gone. It should be taken under control with a detection device by going to the service masters. If there is any leakage or similar in electrical currents, it is eliminated. Automatic window failure is directly related to the problems experienced in electrical components.

                    If there is no Automatic Glass Fault Solutions after all these checks, you should deliver the vehicle to the service or to the mechanic you always go to. Necessary checks are made and the problem will definitely be solved by checking all places where electric current passes. Don't try too hard yourself. You may cause other parts to fail.

Continue reading →

Ford Focus Starting Problem and Solution

 

                         Ford Malfunctions occur chronically in vehicle models for various reasons. The Ford Focus series becomes the most widely used model. In the Focus series, there is a risk of problems arising from the capacity of the vehicle and some technical parts. Focus users who are looking for a solution to the "Not Starting" problem try various methods. Most of the time, a direct solution cannot be found. The problem of vehicles not starting can sometimes turn into an advanced malfunction. Sometimes it is short-term and can be solved with a few small procedures.

                                  Solution to the Problem

             Discharged and Weak Battery: There are electrical components that enable the vehicle to start properly and directly. The battery is at the top of them. If the battery is weak and does not transmit enough electric current to the engine, problems with not starting or starting late may occur. The battery should be checked and, if necessary, charged at service maintenance points.

              Wrong Fuel Use: Ford Focus models are extremely sensitive about fuel. It is against the use of fuel that will affect the performance of the vehicle. If the tank is filled with the wrong fuel or very low fuel quality, the starting current going from the starter area to the engine part will not show good ignition. You should choose the places you buy fuel carefully.

              Checking the Ignition System: The ignition system ensures that the starter works properly and transmits the power received from there to the engine. Generally, the problem is caused by a malfunction in the ignition system. You can solve the problem by checking the ignition part and taking it to the service center.

            In case of malfunctions such as "Starting the Vehicle Starts Late" and similar problems of not starting, the specified places must be checked. Although there is a possibility of chronic occurrence in Ford models, technical parts problems in the vehicle trigger starter failure.

Continue reading →

Vehicle Stalling When the Engine is Cold and Solution

 

                   Among Ford Malfunctions, it can be seen chronically in some models. Sudden stalling of the vehicle, which occurs in Ford Fiesta and its series, may gradually become worse. Drivers complain that the vehicle stalls when the engine is cold. Solutions must be found by getting to the root of the problem. The problem of stopping the vehicle while driving may gradually increase.

                                 Solution to Vehicle Stalling

              Checking the Fuel Filter: Clogging occurs in the fuel filter section over time. That's why the filter area cannot get air. The engine cannot operate at full capacity due to the resulting blockage. This causes it to stall even while moving.

                Check EGR Valve: The EGR valve is very important. It adjusts the temperature by controlling the exhaust gas intake system. It keeps the temperature going to the engine at a certain level and ensures comfortable operation of the vehicle. If a crack occurs in the valve, the vehicle will come to a sudden stop. It is a definitive piece to look at.

                Engine Sensor Maintenance: In order for the engine to run smoothly and not stall without stopping, the sensor pores must be kept clean. By having engine sensor maintenance done at certain intervals every year, the vehicle can be operated much more efficiently.

               Check Idlem Air Control Valve: The idle valve allows the vehicle to run at idle. If there are cracks or breaks in the valve that adjusts the idle speed, the engine will stall with a clicking sound when cold. Sometimes, if he is at an advanced level, he can do it while on the move. If there is a malfunction in the valve, it is logical to fix it as soon as possible and, if necessary, to replace the part completely.

                 When the mentioned check is performed, the Vehicle Stalling Error is resolved. If the fault persists despite these, going to the service and performing other maintenance of the vehicle and replacing the parts deemed necessary will solve the problem.

Continue reading →

Ford Focus Alternator Failure and Solution

 

Ford Malfunctions: Some problems may appear chronic. Alternator Failure is common in Ford models. The solution is simple, but it can cause extreme problems in ongoing malfunctions. The alternator powers the vehicle's electrical components. It is especially important for the battery area. It is slightly more in Ford Focus models. It may turn into a chronic error. The fact that it is used to operate the electrical parts of the vehicle means that the fault can be corrected immediately.

                                                Alternator Fault Solutions

               When an Alternator Failure occurs, the battery cannot operate at full capacity. In addition, other electrical parts do not provide full efficiency to the vehicle. The solutions are as follows:

                  Charging System Control: There are electrical panels that play an active role in the operation of the vehicle. If it is charged properly or partially, Alternator failure will begin to occur. When the alternator cannot charge to full capacity, battery discharge occurs. The vehicle's charging system cable and power storage area must be checked.

                 Checking the Alternator Area: It will be necessary to check the alternator parts inside the vehicle and remove any wear on parts such as belts and bolts. Over time, it is observed that the cables and metal parts passing through the alternator current wear out and disintegrate. If it is not detected in time and the problem grows, the electric current slows down. This prevents the vehicle from operating properly.

               Checking the Battery Area: If full electrical current does not reach the battery section, the vehicle will not start. Even if it works, interruptions and sudden stalling of the vehicle occur. If there are interruptions while the vehicle is driving or if it suddenly stalls while operating, it must be checked. Otherwise, the alternator failure will worsen and cause other problems.

                Causes of Alternator Failure are entirely related to electrical faults. It causes malfunctions, from the battery to all kinds of electrical cables. It can cause serious damage, including burning the electrical parts of the vehicle. It can be resolved before any malfunction occurs by taking timely precautions and performing the necessary system maintenance.

                        

Continue reading →

Ford Focus Oil Burning Error and Solution

 

Ford Malfunctions are chronic in some models. In some cases, it may occur over time and cause major malfunctions. Oil Burning Failure will cause major malfunctions, and if it is not prevented in a short time, problems will occur that may lead to the vehicle not functioning. Let's look at the problems that cause fat burning and focus on what the solution would be.

                                     Oil Filter Replacement

Filter replacement is one of the most common oil burning problems. Filter wear occurs due to irregular oil changes and the use of poor quality oil. Failure to change the oil filter on time triggers the problem. It causes increased oil leaks. If there is an oil burning problem, regular maintenance should be done and the filter part should be cleaned immediately.

                                         Piston Maintenance

Oil Burning Problem can be seen in all vehicles. Piston maintenance is very important in Ford models. Malfunctions occur due to wear on the piston part, contamination and rust on its surface over time. This causes the fat burning problem. Piston replacement and maintenance should be done.

                                       Engine Overheating

While the vehicle is driving, overheating occurs in the engine compartment due to excessive revs. If engine temperature is not controlled, oil burning due to stress may occur. Precautions must be taken.

                                      Control Air Flow

If the air flow part is not controlled, oil burning problems will occur in vehicles. Maintenance of the engine part and the piston parts that ensure comfortable operation of the vehicle is necessary. Situations such as clogging, rust, and breakage over time cause oil burning problems.

Continue reading →

What happens if the diesel filter is clogged?

 

                                           Diesel Oil Filter is one of the most important parts for cars. It ensures that the vehicle running performance and other accents work more smoothly. It would not be a lie if we say performance part for the vehicle. For this reason, maintenance must be done. In the most dangerous situation, the diesel filter becomes clogged. The filter loses power according to the dirt accumulated over time and the aging conditions due to abrasion on its surface. It gradually starts to clog and does not benefit the car as strongly as before. 

                                      How to recognize a clogged diesel filter          

                 There are some ways to understand the cause of this dangerous malfunction that will occur in Ford Malfunctions. But you need to be a little careful and sensitive. If the following is happening in the vehicle, the filter has started to clog;

                                   . If the vehicle suddenly stalls when the gear is in neutral

                                   . Vehicle Runs Jerky

                                    . Difficulties in starting the vehicle

                                    . Vehicle May Not Eat Gas

                                    . Changes in the vehicle idling and runaways in its adjustment

                                    What happens if the diesel filter is not changed? 

      Diesel Oil Filter Change must be done. If the above-mentioned things are present in the vehicle, filter replacement should be done by going to the nearest service. Between 15-20 thousand KM in vehicles, filters need to be serviced and replaced. If the filter is not changed, the following malfunctions continue to occur in the vehicle; 

                                  . The vehicle runs later in the morning

                                  . Vehicle fails to supply fuel

                                  . Dirty fuel and cleaning the fuel will greatly damage the injector parts. 

                                   . Frequent misfires and very noisy operation of the vehicle

                                         

Continue reading →