Clicking When the Engine Is Cold

 

Plugging Sound when the Engine is Cold is one of the problems that should be taken seriously. In the beginning, it may not be taken care of much, but over time, so much noise begins to be heard that while driving the vehicle, one ear is constantly on the sound. So why there is a Plugging Sound when the Engine is Cold It is necessary to examine it a little and explain the parts that cause the sound.

                                    Why Does a Plug Sound Come on When the Engine Is Cold?  

             Clicking When the Engine is Cold will be due to various reasons. After the vehicle starts, there may be a malfunction due to the following two reasons;

                        Idle Plug Sound: You started the vehicle and heard the click sound when the engine was cold. If the sound stops when you press the gas afterward, and even if it doesn't come at all, the real source of the problem is "Idle Problem". Problems such as deterioration in the idle adjustment, improper functioning of the idle parts and wear over time cause the clicking sound.

                       Engine Mounts Failure: If the vehicle runs jerkily when it is cold and the clicking sound continues for a long time, it means that there are breaks in the engine mounts. The engine does not run at full power due to ruptures. This causes the plug sound to increase due to overload. Motor ear problem is a problem that needs to be seriously examined.

                                  Plug and Play Sound While Car is Running

           Except for the problems we have given above, the sound of "Pull and Tack" after the vehicle starts indicates a malfunction related to the engine bearings. Such a problem with engine bearings can cause very costly repairs. When the vehicle is in motion, if you take your foot off the gas, a click sound is heard with the same intensity, and if the sound stops again when you press the gas, it means that the fault in the engine bearings is increasing.

                                  What is the Solution?

        The Plug Sound failure from the Engine Bearing is very troublesome financially. It can cause a malfunction that gives you a headache. We strongly recommend that you troubleshoot this issue. But if it is financially difficult, the following temporary ways can be followed;

                    1. Engine Oil Additives are Used

                    2. Mot Noise Cutters to Try

                    3. Repairing Oil Treatments Can Be Done