Ford Transit Transmission Malfunction and Solution

 

                             Ford Transit is one of the most popular series. Different series of the model are very popular. Transmission Malfunction, which is frequently encountered in the vehicle, may occur. It is not due to weak or bad transmission parts, but due to lack of necessary maintenance. Transmission problems may also occur in Transit models that are used frequently. Transmission maintenance and not overusing the vehicle will reduce the problem. In order for the car to perform more efficiently, it is necessary to fix the transmission fault.

                                         How to Identify Transmission Failure?

                In order to solve the fault, it is necessary to detect the fault completely. If the vehicle has the following changes:

                           . If the vehicle does not fully shift into gear or has difficulty shifting

                           . The performance of the vehicle decreases and it has difficulty on steep slopes

                           . Transmission shaking, shaking and strange noises

              If there are things you have doubts about among the things I have listed, it means that there is a Vehicle Transmission Failure. It is recommended that you apply for solutions and take the necessary precautions by having your vehicle's transmission parts checked as soon as possible.     

                                                 Transmission Fault Repair

           Transmission Oil Control: The oil level of the transmission parts must be full. Since its function is heavy, it should do its job in the vehicle without forcing it. If the oil level is low, it will start to make noise due to wear and tear on its surfaces. Checking it will solve the problem.

          Changing the Transmission Filter: The filter part wears out over time, causing its pores to become clogged. External influences and oil-like waste inside the vehicle clog the filter. You can reduce the risk of transmission failure by changing the filter.

          Detection and Replacement of Damaged Transmission Part: The damaged part is checked and replaced by the service. It will be prevented before the malfunction spreads to other regions and precautions will be taken accordingly.

         Complete Replacement of the Transmission: If the source of the fault has reached an advanced level and has completely lost its function, the Transmission will need to be replaced. This is the effective and definitive way. After making the change, the performance of the vehicle increases by one hundred percent.

           What Causes Transmission Failure? If the maintenance of the supplied parts is carried out too late, wear out over time and technical malfunctions leading to misuse of the vehicle occur. If no precautions are taken, it goes to the next level. While there may be Ford Malfunctions, Transmission problems are also seen in other vehicle models. Maintenance and replacement of the part when necessary preserves the performance of the car as on the first day.

        

Read more »

Water Leakage from Ford Tourneo Thermostat Body and Repair

 

                    In the Ford Tourneo model, some malfunctions may occur outside the driver's control. While chronic unintentional malfunctions are sometimes annoying, sometimes they can be easily resolved. Thermostat Body Water Leakage Failure can be evident in Tourneo series. Since the thermostat adjusts the water setting and temperature, this is the problem that needs to be looked into. If you notice water leaks from the thermostat body, you should immediately seek solutions.

                               Repairing the Fault

        Vehicle Thermostat Failure is the type that needs to be resolved before proceeding. Since it is close to the vehicle engine, the problem progresses to the engine parts. You should perform some checks, find out the fault yourself, and take your car to the service and vehicle experts.

                   Determine the Location of the Thermostat Body Yourself: The thermostat is located just above the engine block. Before understanding the problem, you must determine the location of the thermostat part well.

                 Checking for Water Leakage in the Thermostat Body: Clean the upper and lower parts of the thermostat body thoroughly with a dry cloth. Then start the vehicle and wait for approximately 3 minutes. When you look at the thermostat body again, you will understand whether there is a leak. Small splashes of water attract the eye.

               Check the Gaskets on the Thermostat: Check the gaskets on the body to see if they are loose or worn. Look. If there are similar problems, the thermostat part must be replaced and the gaskets must be renewed.

               Thermostat Body Renewal: If there are malfunctions listed and the problem gradually increases, the body needs to be replaced. Going to service and necessary maintenance places and replacing the thermostat body will completely solve the problem.

                  When the complaint of Thermostat Body Leaking Water occurs, the given methods are followed and the body is completely replaced or the gaskets are maintained. If the thermostat body does not work properly, engine malfunction and problems with spillage to other parts may occur. Performing maintenance on time will greatly change the performance of your vehicle.

Read more »

What is a Diesel Pump Failure? How to Identify?

 

                                 Timely maintenance and repair of the fuel section of vehicles ensures the healthiest driving. The main reasons why diesel pump failure occurs is the lack of necessary maintenance. The problem is that the pump and its parts become worn out or fail to function due to various reasons. Diesel Pump Sensor failure, which consists of the same part, requires the renewal of the entire part. When the fuel pump sender part does not work at the required level, it will cause rapid fuel consumption and malfunctions that may lead to the vehicle engine not working properly.

                                                How to Identify?

                 Causes of Diesel Pump Failure? In order to understand, you can perform some checks of the vehicle and then proceed to the repair phase after some operations. You can conclude that the pump is faulty by examining the following:

                                .If the vehicle does not start in the morning or starts too late and causes problems with stoking

                                . If the vehicle suddenly stops while driving or idling

                                . If the vehicle is experiencing acceleration problems and the hammer power has decreased, it means that there are diesel pump malfunctions down to the Turbo area

             If you encounter problems like the ones above and the problem increases day by day, it is time for Diesel Pump Malfunction Repair. It is necessary to take it to the service and have the maintenance done and the necessary parts to be replaced immediately. Otherwise, the diesel pump will spread the fault to other parts and you may suffer major financial losses.

                              

               

Read more »

Vehicle Turbo Malfunction and Solution

 

                                          Engine performance of vehicles is very important. Malfunctions manifest themselves when necessary maintenance and oil repair work is not carried out. The most common one is Vehicle Turbo Failure. In cars, it functions to increase turbo engine performance and enjoy a healthier driving experience. If a Turbo Failure Problem occurs, the engine will lose power over time and spread the problem to other parts. Wear, oil loss, and major malfunctions leading to complete loss of function of the turbo can cause trouble.

                                             Causes of Turbo Failure?

             Adjusts the engine speed in turbo vehicles. When the rpm reaches 2500, Turbo comes into play in diesel vehicles. In this way, the engine relaxes and continues to work efficiently. When the turbo cannot give full power to the engine, the speed increases gradually and this affects the consumption of a lot of fuel.

                                . Turbo, which powers the engine, loses its function due to lack of oil control and neglect for a long time

                                . Failure to change engine oil regularly will cause the turbo to be affected

                                . If the engine oil is of poor quality, or if it is constantly changed by using a different oil brand, the Turbo cannot work properly

                                . The part where the turbo mechanism is located must be carefully protected. The malfunction grows as clogging occurs due to dirt entering from outside and lack of maintenance

                                . Wear and deformation of the turbo shaft and bearing system

                               . Failure to activate the turbo cooling system in time may cause malfunctions within the engine

                                 How to Identify Turbo Failure?

                   . Vehicle fuel consumption increases and fuel decreases faster than before

                   . Performance decreases and hammer power decreases on steep slopes

                   . When the turbo pressure gauge is checked, a decrease can be seen

                  . More smoke than normal begins to be released from the exhaust

                  . Incomprehensible changes in exhaust combustion data and constant illumination of the engine malfunction warning lamp

            Turbo Troubleshooting will be solved by visiting the service or repair places related to the maintenance of diesel vehicles. Turbo mechanism areas are examined in detail, malfunctions in the parts are detected and repair work is carried out. If the turbo works with its first day performance, the vehicle engine will not wear out and will always keep itself alive.

Read more »

Ford Mondeo Overheating Problem and Solution

 

                         In some cases, technical malfunctions occur in Ford Mondeo models. While sometimes it is minor, most of the time it can become annoying. Vehicle Overheating Fault can be seen frequently in Ford Mondeo series. There are factors that affect the parts, such as not checking the parts that cause heating, and the formation of wear and tear over time.

                                         Heating Problem Solutions

               Water Pump Failure: The water pump prevents overheating by circulating the cooling water in the engine area. If there are cracks in the water pump or if a part malfunction occurs, the heating problem will increase. The pump part must be maintained on time.

                Thermostat Failure: Thermostat is another part of the vehicle that controls the temperature and relieves the engine. If the thermostat is faulty, the temperature control will be automatically disabled. At that time, the heat coming from the engine does not turn into cold. This causes too much heat to be emitted.

                Radiator Control: If the radiator is clogged or has various abrasions on it, hot air mass spreads to the engine area instead of cooling. It should be checked and removed if there is any blockage, and if necessary, the part should be replaced completely.

                 Crankcase Ventilation System Failure: The crankcase part acts as ventilation in the vehicle. If a malfunction occurs, the vehicle cannot breathe easily. Since there is no ventilation, the engine starts to heat up more than it already does and it cannot be prevented.

                 Fan Malfunction: If the fan in the vehicle is defective, it causes most of the heat to be kept inside and not to be released outside. If the fan does not work sufficiently or is not turned on for a long time, the heat in the engine will gradually increase. Periodic fan maintenance prevents heating problems.

                  The Vehicle Overheating Problem is caused by incomplete or non-existent maintenance listed above. In order for the engine to cool and relax to the necessary extent, it is necessary to control the parts that will prevent the vehicle from overheating. If maintenance is not done on time, heating problems will increase in Ford Mondeo and other Ford series.

Read more »

Automatic Window Malfunction and Remedy in Ford Models

 

                           Ford Malfunctions Today, I will talk about "Automatic Glass", which is of great importance for the vehicle. While automatic glass is very important for the vehicle, it is associated with frequent malfunctions in some Ford series. While Automatic Window Failure is caused by various reasons, the problem can be solved by trying some small ways.

                                  Causes of Automatic Glass Failure

         Ford users who encounter problems such as Automatic Window Not Opening become anxious. If the automatic window does not open or closes late when opened, they can get to the source of the problem safely by performing the checks I will give below.

                 Window Sensor Must Be Cleaned: The sensors become large when opening the automatic window. When automatic opening is pressed, the windows lower and raise with the help of the sensor. If the sensors are clogged and no longer functional, it is time to replace them and maintain them.

                  Way to Reset the Windows: Resetting the glass can provide a solution in case of automatic glass failure. Be careful during the reset process. You must remove the "Negative" cable on the battery. Before the procedure, close all windows and turn off any other electrical currents of the vehicle. You should unplug the cable and wait for a maximum of 15-20 minutes. Afterwards, when you plug in the cable and start the vehicle, the windows will automatically reset.

             Checking with a Diagnostic Device: The electrical parts of the vehicle may be faulty or completely gone. It should be taken under control with a detection device by going to the service masters. If there is any leakage or similar in electrical currents, it is eliminated. Automatic window failure is directly related to the problems experienced in electrical components.

                    If there is no Automatic Glass Fault Solutions after all these checks, you should deliver the vehicle to the service or to the mechanic you always go to. Necessary checks are made and the problem will definitely be solved by checking all places where electric current passes. Don't try too hard yourself. You may cause other parts to fail.

Read more »

Causes of Noise and Fault Coming from Ford Fiesta Steering Box?

 

                               There are some chronic faults in the Ford Fiesta series. Malfunctions that occur spontaneously or result from neglect of some maintenance of the vehicle may manifest themselves. Noise coming from the steering box is a problem that may seem simple, but if it progresses, it will cause serious problems. Precautions must be taken. There will be a few specific reasons for noise coming from the steering box. It manifests itself with disturbing noises, stiffness and difficult turning problems when turning left and right while the vehicle is in motion.

                                       Causes of Steering Box Malfunction?

              Decrease in Steering Fluid: There is fluid that helps the steering wheel move smoothly. If the fluid decreases in the box area and reaches the bottom area, strange sounds will be heard when the steering wheel moves. If the sound intensity increases, it should be taken under control immediately. It is necessary to check the liquid at regular intervals.

               Steering Box Seal Check: There are seals in the box coming to the steering wheel. If the seals become loose or excessively worn, they will make noise. The steering becomes stiffer automatically. It reveals itself directly while translating. The seals coming towards the box and steering wheel must be maintained.

                Checking Steering Parts: There are connection parts coming to the steering wheel. It is in common connection with the steering box. If parts of the box or steering parts break down, breaks occur between the two connections. Room makes the steering wheel move with heavy noise. Parts may require service.

                   The problem of noise coming from the steering wheel will increase if the control I mentioned is not carried out. You can take it to service to have it inspected and take precautions. If the sound is mild at the steering wheel, preventing it from getting bigger will save you from heavy damage costs. Completing the power steering connection and the fluid inside before it decreases greatly reduces the risk.

                   

Read more »

Ford Fiesta Fuel Leak Error and Solution

 

                       It is seen that some parts in Ford Fiesta models give chronic errors over time. It does not cause much damage, but precautions must be taken. Fuel Leak Fault can be seen frequently in Fiesta series. It is caused by situations such as lack of basic maintenance and failure to maintain the Injector O-Rings that cause leakage. Fuel leakage directly reduces the power of the engine. It prevents it from working at normal settings and problems may occur in other parts.

                                What Causes Fuel Leakage?

         There are certain reasons for fuel leakage in Ford Fiesta or other series. Cracking or minor wear on the injector O-rings will cause fuel leakage. Although it may seem small at first, leaks increase over time and malfunctions leading to engine damage occur. Having the part maintained at regular intervals will prevent problems from occurring.

                                  What are the Solutions?

        Checking Injector O-rings: If fuel leakage is suspected, the first place to look should be the injector o-rings. Because that is the channel through which the fuel passes. From there it spreads to other firing zones. If injector wear and cracks occur, the problem will increase.

         Cleaning the Injectors: Cleaning the injector for a long time will cause excessive dirt to accumulate. This prevents blockages and fluid from passing easily. One of the main sources of fuel leaks is not cleaning the injectors.

        Changing the Fuel Filter: The fuel filter has fine pores. It may even need to be changed several times during the year. The fuel filter will wear out due to intensive use of the vehicle, hard driving, and frequent use in dusty environments. To prevent this, it makes sense to clean the filter and replace it immediately if necessary.

         Those who experience the Vehicle Leaking Fuel problem have not performed the necessary maintenance on Ford Fiesta and other models in a timely manner. Parts wear out depending on the duration of vehicle use. As it wears out, disintegration and blockages occur. The first cause of fuel leakage is filter and injector clogging. Regular checking of the two sections prevents malfunction before it starts. Even if a malfunction occurs, it can be resolved before proceeding.

Read more »

Ford Focus Starting Problem and Solution

 

                         Ford Malfunctions occur chronically in vehicle models for various reasons. The Ford Focus series becomes the most widely used model. In the Focus series, there is a risk of problems arising from the capacity of the vehicle and some technical parts. Focus users who are looking for a solution to the "Not Starting" problem try various methods. Most of the time, a direct solution cannot be found. The problem of vehicles not starting can sometimes turn into an advanced malfunction. Sometimes it is short-term and can be solved with a few small procedures.

                                  Solution to the Problem

             Discharged and Weak Battery: There are electrical components that enable the vehicle to start properly and directly. The battery is at the top of them. If the battery is weak and does not transmit enough electric current to the engine, problems with not starting or starting late may occur. The battery should be checked and, if necessary, charged at service maintenance points.

              Wrong Fuel Use: Ford Focus models are extremely sensitive about fuel. It is against the use of fuel that will affect the performance of the vehicle. If the tank is filled with the wrong fuel or very low fuel quality, the starting current going from the starter area to the engine part will not show good ignition. You should choose the places you buy fuel carefully.

              Checking the Ignition System: The ignition system ensures that the starter works properly and transmits the power received from there to the engine. Generally, the problem is caused by a malfunction in the ignition system. You can solve the problem by checking the ignition part and taking it to the service center.

            In case of malfunctions such as "Starting the Vehicle Starts Late" and similar problems of not starting, the specified places must be checked. Although there is a possibility of chronic occurrence in Ford models, technical parts problems in the vehicle trigger starter failure.

Read more »

Why Does AdBlue Error Light Come On? What is the solution?

 

                          Adblue is indispensable for diesel vehicles. It is environmentally friendly. It also increases the performance of the engine in diesel vehicles. Why Does AdBlue Error Light Come On? If the problem is occurring, there will be several reasons. When you look at them, the problem disappears. If it is not taken into consideration and continues to be used in that way, it can lead to the danger of being stranded on the road.

                                            What is the solution?

             If the Adblue fault light is on, it means that there is a decrease in the Adblue part. A certain amount of reduction does not cause much trouble. If it is not checked and the decrease progresses, the fault light continues to illuminate. If you are on the road, you need to search for the nearest petrol station and fill up with Adblue fuel. If you have a long journey, you should call a tow truck and go to the petrol offices that way. Otherwise, the decrease in engine power caused by Adblue and malfunctions down to the exhaust section not working fully efficiently may endanger the vehicle.

                                             What is Adblue used for?

          What is Adblue? There may be diesel users who do not fully know. Adblue "Increases the diesel performance of the vehicle and ensures that the smoke flow coming from the engine to the exhaust spreads cleaner to the environment, allowing the engine to get rid of smoke and oil-like effects." If Adblue is low or not controlled, there will be visible differences in the vehicle. Driving pleasure decreases, engine power weakens, and very heavy smoke is released into the environment in exhaust emissions.

Read more »

Vehicle Stalling When the Engine is Cold and Solution

 

                   Among Ford Malfunctions, it can be seen chronically in some models. Sudden stalling of the vehicle, which occurs in Ford Fiesta and its series, may gradually become worse. Drivers complain that the vehicle stalls when the engine is cold. Solutions must be found by getting to the root of the problem. The problem of stopping the vehicle while driving may gradually increase.

                                 Solution to Vehicle Stalling

              Checking the Fuel Filter: Clogging occurs in the fuel filter section over time. That's why the filter area cannot get air. The engine cannot operate at full capacity due to the resulting blockage. This causes it to stall even while moving.

                Check EGR Valve: The EGR valve is very important. It adjusts the temperature by controlling the exhaust gas intake system. It keeps the temperature going to the engine at a certain level and ensures comfortable operation of the vehicle. If a crack occurs in the valve, the vehicle will come to a sudden stop. It is a definitive piece to look at.

                Engine Sensor Maintenance: In order for the engine to run smoothly and not stall without stopping, the sensor pores must be kept clean. By having engine sensor maintenance done at certain intervals every year, the vehicle can be operated much more efficiently.

               Check Idlem Air Control Valve: The idle valve allows the vehicle to run at idle. If there are cracks or breaks in the valve that adjusts the idle speed, the engine will stall with a clicking sound when cold. Sometimes, if he is at an advanced level, he can do it while on the move. If there is a malfunction in the valve, it is logical to fix it as soon as possible and, if necessary, to replace the part completely.

                 When the mentioned check is performed, the Vehicle Stalling Error is resolved. If the fault persists despite these, going to the service and performing other maintenance of the vehicle and replacing the parts deemed necessary will solve the problem.

Read more »

Clutch Sub-Cyber Failure and Its Causes?

 

                     As well as the parts that are visible to the naked eye, the clutch part also has hidden parts, which we call the lower centre. The main factor in the occurrence of Clutch Malfunctions are the parts that cannot be seen. Abrasions, problems occurring in the pressure lining and technical problems occurring in the clutch section over time have an impact. It is interpreted as sub-center failure. While driving the vehicle, the clutch starts to not provide driving pleasure. There are serious problems with gear shifting and it gets to the point of being extremely uncomfortable.

                                      Clutch Stuck Under Pressure

              If the vehicle is driving and the pedal remains stuck when the clutch is pressed, there may be a sub-center failure. The pedal does not get stuck easily. It is considered for problems related to hardness of use. As generally stated, there is a fault in the connections at the pressure pad point.

                              Oil leak in the left side of the engine compartment

       The oil levels of the clutch pressure plate and clutch connected parts pass close to the engine part. If leaks occur in the immediate left area of the engine compartment, what causes clutch failure? It is the answer to the question. It may damage the engine part.

                                Difficulty in Gear Shifts and Noises

        The faster and smoother the clutch, the smoother the gear shifts. If there is difficulty in shifting gears and different sounds are heard, it means there are problems with the clutch lining parts. No sound is produced easily. Looking at the clutch lower tab parts is an urgent task.

                                 Continuous Loss of Brake Fluid

        Brake fluid passes through the lower compartment connected to the clutch. If the hydraulic oil is running low and the steering feels stiff, it most likely indicates a problem with the clutch. You can find the source of the problem by monitoring the hydraulic oil.

                                     Solution to the Fault

         Clutch malfunctions are caused by the problems I listed above. The problem has a simple solution. You can do this yourself. It is necessary to bleed the air in the lower clutch area. If you do not know the exact location, you should take it to its master. There is a large bolt in the clutch area. The bolt begins to be moved slightly with the help of the wrench. You should turn it a few times and then open it completely. The air accumulated there during the process will release itself in the form of oil. After that, it can be understood from the clutch pedal that the fault has been resolved. However, do not forget to have the technical control and oil added.

Read more »

How to Identify Gasket Burning?

 

                         Vehicles have some common problems. Gasket Burning Failure is one of them. It is a very serious problem for the vehicle. If it reaches advanced levels, it will cause serious trouble. It is necessary to take precautions as soon as possible. The performance of the vehicle is increased by performing necessary maintenance and repairs. How to Understand Gasket Burning in Cars? It is necessary to pay attention to very fine details. Because it is very difficult to understand.

                                      Symptoms of Vehicles Burning Gaskets? 

                 . If there is foaming in the oil cap, it should be taken into consideration.

                 . Hardening and some wear on radiator hoses

                . If there is excessive water loss and the cause is unknown, it is necessary to look into it.

                . If the Gasket part tested receives a leak report

                . If there is slight noise and occasional sounds while the vehicle is running

                . If oil is mixed into the engine water (the most important symptom)

                . If there is water in the engine oil (this is the most important symptom)

                . Decreased performance may occur in the vehicle

                             Gasket Burning Car Repair

       Vehicle Gasket Burns What Should I Do? If you are getting an error, is the simplest way to reduce water too much? You should get checked and go to the nearest service. Problems such as water contamination in the oil compartment or excessive oil contamination in the engine compartment may occur. When time is wasted, serious problems will come your way, even leading to the engine burning out. The repair is quite simple. The important thing is to detect it in time and go.

       Replacement of the gasket and repair of damaged parts. If there are advanced cracks, the gasket part will be completely replaced. If the damage to the engine and the part where the oil is placed is excessive, repairs will be started. Since a Gasket Burning Car will cause leaks, leaking hoses and other parts must be taken under control as soon as possible. There is no repair method you can do during this process. You should immediately contact the service person and the mechanic of the vehicle you take regularly.

                

                

                 

Read more »

Ford Focus Alternator Failure and Solution

 

Ford Malfunctions: Some problems may appear chronic. Alternator Failure is common in Ford models. The solution is simple, but it can cause extreme problems in ongoing malfunctions. The alternator powers the vehicle's electrical components. It is especially important for the battery area. It is slightly more in Ford Focus models. It may turn into a chronic error. The fact that it is used to operate the electrical parts of the vehicle means that the fault can be corrected immediately.

                                                Alternator Fault Solutions

               When an Alternator Failure occurs, the battery cannot operate at full capacity. In addition, other electrical parts do not provide full efficiency to the vehicle. The solutions are as follows:

                  Charging System Control: There are electrical panels that play an active role in the operation of the vehicle. If it is charged properly or partially, Alternator failure will begin to occur. When the alternator cannot charge to full capacity, battery discharge occurs. The vehicle's charging system cable and power storage area must be checked.

                 Checking the Alternator Area: It will be necessary to check the alternator parts inside the vehicle and remove any wear on parts such as belts and bolts. Over time, it is observed that the cables and metal parts passing through the alternator current wear out and disintegrate. If it is not detected in time and the problem grows, the electric current slows down. This prevents the vehicle from operating properly.

               Checking the Battery Area: If full electrical current does not reach the battery section, the vehicle will not start. Even if it works, interruptions and sudden stalling of the vehicle occur. If there are interruptions while the vehicle is driving or if it suddenly stalls while operating, it must be checked. Otherwise, the alternator failure will worsen and cause other problems.

                Causes of Alternator Failure are entirely related to electrical faults. It causes malfunctions, from the battery to all kinds of electrical cables. It can cause serious damage, including burning the electrical parts of the vehicle. It can be resolved before any malfunction occurs by taking timely precautions and performing the necessary system maintenance.

                        

Read more »

Ford Fiesta Flywheel Failure

 

                        Flywheel Failure may occur in Ford Fiesta models. The vehicle has difficulty taking off, especially on steep slopes. It's like the engine doesn't have enough power. If the same event is repeated several times, it means that there are malfunctions in the flywheel part. It is a chronic condition that is frequently seen in Ford Fiesta models. Late general maintenance and wear of the flywheel mechanism in a short time will cause malfunction.

                                           Causes of Flywheel Failure?

                   Flywheel Failure is caused by various reasons. The most important factor is caused by "Clutch". Wear in the clutch cables and parts triggers the problem. Using the clutch part too hard will cause the problem to worsen. There are also reasons caused by part flow, which we call flywheel gear stripping, while the vehicle is running.

                   Grinding noise when starting the starter: If you hear an annoying grinding sound when you start the vehicle, it means there is a belt failure. It cannot send full ignition because the belt is stripped. As it is forced, there is a problem with sound.

                      Loud metal friction noise: If you hear a high friction noise while your vehicle is driving and it continues uninterruptedly, it means that the flywheel parts are rubbing against each other. If you hear the same sound when you stop the vehicle and start it again, you should take it to the technical service without trying too hard.

                                             Flywheel Failure Repair

            When it becomes clear that there is a flywheel failure based on the symptoms in the vehicle, it is necessary to take the vehicle to the nearest technical service. If the sound coming from the vehicle is loud and becomes very difficult while driving, it is necessary to take it to the nearest car mechanic and have it repaired. Repair of the flywheel part's gears, belt part and other damaged parts will begin. Flywheel and belt will be completely replaced if necessary. 

                    

Read more »

Ford Focus Oil Burning Error and Solution

 

Ford Malfunctions are chronic in some models. In some cases, it may occur over time and cause major malfunctions. Oil Burning Failure will cause major malfunctions, and if it is not prevented in a short time, problems will occur that may lead to the vehicle not functioning. Let's look at the problems that cause fat burning and focus on what the solution would be.

                                     Oil Filter Replacement

Filter replacement is one of the most common oil burning problems. Filter wear occurs due to irregular oil changes and the use of poor quality oil. Failure to change the oil filter on time triggers the problem. It causes increased oil leaks. If there is an oil burning problem, regular maintenance should be done and the filter part should be cleaned immediately.

                                         Piston Maintenance

Oil Burning Problem can be seen in all vehicles. Piston maintenance is very important in Ford models. Malfunctions occur due to wear on the piston part, contamination and rust on its surface over time. This causes the fat burning problem. Piston replacement and maintenance should be done.

                                       Engine Overheating

While the vehicle is driving, overheating occurs in the engine compartment due to excessive revs. If engine temperature is not controlled, oil burning due to stress may occur. Precautions must be taken.

                                      Control Air Flow

If the air flow part is not controlled, oil burning problems will occur in vehicles. Maintenance of the engine part and the piston parts that ensure comfortable operation of the vehicle is necessary. Situations such as clogging, rust, and breakage over time cause oil burning problems.

Read more »